Multihead Weigher

Key benefits

  • 12-16 weeks is the typical amount of time but we have achieved ROI in only 19 days
  • Minimise Product Giveaway
  • Reduction in Downtime
  • Maximise Line Efficiency
  • Reduction in Rejected Products
  • Minimal Operator Intervention

Want to find out more?

For more information about our cross head feeders, or to request a quote Call us now on +44 (0)1384 895 121.

Multihead weighers use a number of different weigh heads to generate precise measurements of products by calculating the weight in each weigh head. Each weigh head has its own precision load cell. The perfect algorithm for an accurate target weight is typically 4 weigh heads.

The weighing process begins when product is fed into the top of the Multihead Weigher. A dispersion table distributes the product into a series of small linear vibratory feeders which individually deliver product to each weigh head. The dispersion table is normally equipped with a load cell which controls the feed of product to the multihead weigher.

Optimising the flow of product to the dispersion table is critical to maximise the accuracy of the multihead weighing process. The typical issues encountered with poor flow of product are overfeeding and underfeeding.

Overfeeding

The multihead weigher will never be accurate if the dispersion table is overfed. In this case the target weight becomes much more difficult to achieve because too much product is supplied to each weigh head. Production lines will stop in some cases as the multihead weigher shuts down if certain levels are surpassed.

Operators occasionally overfeed the multihead weigher under the impression that this helps. This is not true, as it disables the system’s ability to release product when programmed weight tolerances are exceeded.

Underfeeding

When the dispersion table is underfed the production line slows down. Not providing enough product into the weigh buckets slows down the operation of the multihead weigher and makes it more difficult to achieve the target weight. This can also increase the amount of rejected products which are below the required threshold.

The Cox & Plant Solution

Improved production efficiency can be achieved through the use of a vibratory cross head feeder.

Through extensive trials over the last 25 years we have proven that by feeding a multihead weigher with our peripheral (circular discharge), which is fully powered to get the perfect flushing effect, allows the dispersion table on the top of the multihead to be evenly fed. This in turn allows the software to run the perfect algorithm which is typically 4 weigh heads.

Our unique ‘Cox & Plant Synchronisation’ system harmonises the infeed speed to the multihead weigher by tracking the run times which then automatically adjusts the speed of the conveyor.

For more information about our cross head feeders, or to request a quote for your business, call us now on +44 (0)1384 895 121.

Case Studies